BSH-II square grinding machine

BSH square grinding machine is a special equipment for grinding the small cylinder of Nd-Fe-B magnetic material. It is rotated by the diamond grinding wheel and the guide wheel in the main shaft。

一、Main technical factors of machine tools：

1、Maximum processing size：Square grinding circleφ10mm、Cylindrical grinding circleφ18mm、Φ8mmAutomatic feeding is available below

2、Minimum machining size：φ1.8mm

3、Machining length dimension：10- 50mm（Manual feeding）；10- 33mm（Automatic feeding）

4、Processing speed: continuous manual feeding(600mm -1000 mm) /min

5、Workpiece tolerance range: coarse grinding   Out of roundness±0.04mm

6、Traverse travel of idler wheel table80 mm，Graduation range0-100，Per cell for0.02 mm，For each turn2 mm。

7、Upper and lower travel of guide plate：25mm

8、Main motor(AC380×50Hz)1.5KW×1410r/min

  　Auxiliary motor(AC380×50Hz)0.75KW×(0-1200)r/min Adjustable